Manual Vertical Lathe
Single Column Vertical LatheMade in China Single Column Vertical Lathe with CE, ISO Certificates...
Made in China Single Column Vertical Lathe with CE, ISO Certificates
Manual Single column vertical lathe also named Conventional single column vertical turning lathe, Manual single column vertical turret lathe, it’s suitable of the ferrous, nonferrous metal and some kinds of non-metal material with hard alloy, high capability and high speed steel tools. It can perform finely and roughly turning cylinder and inner hole, inner and outer taper, grooving, drilling, tapping and reaming.
The Single column vertical lathe machine process Valves, flanges, gear, bearing etc kinds of disk type, wheel type and sleeve type parts in shipbuilding, automobile making, nuclear power industry.
(3) Typical Workpiece Made by The Machine
(4) Trial Running
Product Photo of Manual Single Column Vertical Lathe
C5131 Single Column Vertical Lathe Structure
Gear is made of 40 cr high quenching treatment, hardness reaches HRC40-45, tooth surface gear grinding, precision can be up to level 6.All these process are made to reduce vibration and noise and improve the machining efficiency and reliability of the machine.
2. Lathe bed
Lathe bed adopts the whole structure and effective vibration reduction measures with high strength and low stress cast iron material. Combining bed with table base greatly improves reliability of the overall machine tool rigidity.
The interface of beam and column guide rail is covered with PTFE wear-resistant guide soft belt with a small friction coefficient. Thus greatly extend the service life of the machine. Beam can move on the column guide rail. The screw lift has the advantages of stable transmission, small friction, low noise, high reliability. Beam clamping adopts lever mechanism of clamping, safe and reliable.
4. Working table
The whole components of workbench adopt thermal symmetric structure and the main shift gear is settled in a base table and the bed body. Workbench radial double row short cylindrical roller bearing with high precision centering, not only ensure the workbench's rotation accuracy, but improve bearing capacity of machine tool. All workbench drive gear and bearing lubricating oil are provided by hydraulic system. Using cast iron parts, workbench adopts geometry symmetry layout to guarantee the smooth movement in the rated speed.
5. Vertical tool post
The vertical tool post is made up by the beam slide, rotary slide, ram and other parts. Vertical tool rest can make horizontal movement on the beam and ram in vertical movement. The advantages: the smooth movement, high transmission efficiency and good accuracy stable.
6. Electrical system
6.1 Electrical parts are picked from TIANSHUI 213 electrical (supporting manufacturers) to ensure the high reliability of the machine tool.
6.2 The electrical components have sign with clear persistent writing.
6.3 Overall neat wiring, line number is complete, and clear last writing.
6.4 Hydraulic pressure system and components of automatic lubrication system adopt domestic licensed product or high quality products. The quality is reliable.
7. Equipment working environment
1 environment temperature: 5℃～40℃
2 environment humidity: When the 20 ℃ relative humidity ≤85％
3 Power in: 50Hz±1HZ, 380V±10％
4 Machine tool working noise: ≤85db
8. The machine standard and machining accuracy
8.1.Machine tool inspection standards
8.1.1 JB/T 9934.1—1999 Vertical lathe precision
8.1.2 JB/T 9934.2---2006 Vertical lathe technical conditions
8.1.3 GB/T 9061---1988 General technical conditions of metal cutting machine tool
8.1.4 GB 5226.1---2002 Electrical equipment of industrial machines The first part is general technical conditions
8.2.The machining accuracy level IT6～IT7
Technical Parameter of Manual Single Column Vertical Lathe
instruction book, operational manual, machine bed, worktable, vertical tool post, beam, hydraulic system, beam protection, electrical cabinet air-conditioning
4 position electric tool post, full protection cover, chip conveyor, cooling system, add height of vertical column
Factory Photos of Vertical Lathe
Installation of C5225 Vertical Lathe at Russia