Dalian Haisen Machinery Co.,Ltd

The Pipe Thread Lathe Appears These Several Abnormalities Should Pay Attention

Jan 23, 2019

      Pipe thread lathe in normal operation, the parameters are shown in the stable allowed range, if the parameters deviate from the normal range, on behalf of the system or machine tool itself or equipment of a part, part failure, must immediately find out the cause, to prevent failure to cause a greater accident.

       1. Abnormal temperature rise.Commonly used in various kinds of pipe thread lathe motor and bearing gear box.

       2. Abnormal rotation speed.Due to sudden change of load or mechanical failure of the machine tool, the machine tool running speed is higher than or lower than the normal speed.

      3. Excessive vibration and noise.Bad design, manufacturing defects, installation defects, parts running imbalance, parts wear, lack of lubrication, foreign bodies into the machine tool, machine tool vibration or noise will cause abnormal.

       4.There was a crash.It may be because the parts loose off, into the foreign body, rotor imbalance.

    5. Abnormal input and output parameters.Performance is: machining accuracy change;Change of machine tool efficiency;Abnormal power consumption of machine tools;Abnormal quality of processed products;The sudden decrease of feeding quantity indicates that the production system is leaking or blocked;The machine tool runs with illness.

      6. Internal defects of pipe threading lathe.Including the occurrence of cracks in the components of the machine tool;The insulation quality of electrical equipment and facilities declines;A defect caused by corrosion.

     Above six abnormal conditions, must not be underestimated, once the emergence of immediately stop the operation of equipment, do a comprehensive inspection and maintenance.


initpintu_副本3 (7)